Professional fence painters Garland TX homeowners trust for wood and metal fence painting and staining. Extend the life of your fence and boost your property’s curb appeal. Free same-day estimates — call (972) 591-1434.
Same day quotes — no obligation. We respond fast.
A faded, cracked, or weathered fence makes your whole property look neglected. Professional fence painting Garland TX from Garland Painting Pros restores and protects your fence so it looks great and holds up to the Texas sun, heat, and seasonal rain.
Whether you have a wood privacy fence, a cedar fence, a metal chain link, or wrought iron — we have the right products and process to prep, prime, and finish your fence properly. A quality fence paint or stain job in Garland TX can extend the life of your fence by 5–10 years.
Wood & metal fences — cedar, pine, chain link, wrought iron, aluminum
Paint or stain — whichever finish is right for your fence type
Full prep included — clean, sand, prime before any finish is applied
Texas-rated products — built to handle UV, heat, and humidity
From wood privacy fences to metal gates — here’s everything our fence painters in Garland TX handle.
Wood privacy fences in Garland TX take a beating from the sun and rain. We clean, sand rough spots, apply a quality primer, and finish with an exterior paint that protects the wood and looks sharp.
Paint vs stain →Cedar fences look best with a penetrating stain that enhances the natural wood grain while protecting against moisture and UV damage. We apply professional-grade stains for a finish that lasts.
Best stains for Texas →Chain link, wrought iron, and aluminum fences all require specific metal primers and rust-inhibiting paints. We prep metal fences properly so the finish bonds and holds up long-term.
Get a Quote →Your fence gate gets more use than any other part of the fence. We paint or stain gates with extra durable products and make sure they’re properly cleaned and prepped for maximum adhesion.
Get a Quote →For wood fences that don’t need a full repaint, a clear waterproof sealer extends fence life significantly by blocking moisture penetration — especially important in North Texas’s wet winters.
Maintenance guide →Older fences with peeling paint, gray weathered wood, or surface rust can often be fully restored with proper prep and a fresh finish — at a fraction of the cost of fence replacement.
How often to redo it →Most fences in Garland are cedar or treated pine, and in North Texas both of them fail the same way if they are left bare: the sun bleaches the surface grey within a year, the boards start to cup and split, and moisture works into the end grain and the rails. Wood fence staining is what stops that. It is genuinely preventative maintenance rather than a cosmetic upgrade — a stained fence lasts years longer than an unstained one.
We stain fences across all five Garland ZIP codes — 75040, 75041, 75042, 75043 and 75044 — from Firewheel and Oakridge to Club Hill Estates, Duck Creek and Camelot. Every quote is free, written the same day, and priced by measurement rather than guesswork.
Cleaned and dried first. Stain applied to a damp or dirty board never penetrates — it sits on top and flakes within months. We wash, treat any mildew, and let the wood reach a proper moisture level before anything goes on.
Penetrating stain, not a surface film. For Garland cedar we use oil and hybrid stains that soak into the wood and block UV from within, instead of film-forming products that peel off a fence and are miserable to fix.
Grey fences brought back. Weathered grey is usually surface UV damage with sound wood underneath. Cleaning and brightening restores a surprising amount of colour before the stain goes on.
New fences timed correctly. New cedar has to weather before it will accept stain. We will tell you honestly if yours needs a few more months rather than take the job early and watch the finish fail.
One side or both. Staining both sides is better for board life, and we coordinate neighbour access ourselves so you are not the one making the awkward call.
Most Garland fence staining runs about $1.50 to $3.00 per linear foot — roughly $300 to $600 for a smaller fence under 100 linear feet, and $1,200 to $2,500+ for larger yards. Plan on restaining every 2 to 3 years in this climate; sun exposure and how much irrigation hits the boards are the two biggest factors.
Get a Free Fence Staining Quote →
One of the most common questions we get about fence painting Garland TX is whether to use paint or stain. Here’s the quick guide:
Paint — best for older fences, provides a solid opaque color, hides imperfections, typically lasts longer between recoats. Best for pine and pressure-treated wood fences.
Stain — best for cedar and natural wood fences, penetrates the wood grain rather than sitting on top, looks more natural, easier to reapply. Better for newer fences in good condition.
Sealer only — best for new cedar or redwood fences with no existing finish. Clear protection, preserves the natural look, easy maintenance.
Not sure which is right for your fence? We’ll assess your fence type, age, and condition during your free estimate and give you our honest recommendation.
Here are typical price ranges for fence painting Garland TX projects to help you budget your project.
| Project Type | Typical Range | What’s Included |
|---|---|---|
| Small Fence (up to 100 linear ft) | $300 – $600 | Clean, prime, 2 coats paint or stain |
| Medium Fence (100–200 linear ft) | $600 – $1,200 | Clean, prime, 2 coats paint or stain |
| Large Fence (200+ linear ft) | $1,200 – $2,500+ | Full fence painting or staining |
| Metal Fence Painting | $400 – $1,500 | Rust treatment, metal primer, finish coat |
| Fence Sealing Only | $200 – $600 | Clear waterproof sealer application |
* Prices vary based on fence length, height, condition, and finish selected. Contact us for a free same-day estimate specific to your fence in Garland TX.
Proper fence painting is all about prep. Here’s exactly how our fence painters do it.
We assess your fence, measure linear footage, check the condition, and give you a detailed written estimate the same day.
We pressure wash or hand-clean the fence, scrape loose paint, sand rough areas, and spot-prime bare wood or treat rust on metal.
We apply your chosen finish — paint, stain, or sealer — using the right application method for your fence type. Two coats minimum.
We do a full walkthrough inspection and touch up any missed spots. Your fence is left clean, finished, and ready for years of protection.
Answers to the most common questions about fence painting in Garland TX.
Garland Painting Pros handles every residential painting project in Garland TX and surrounding DFW communities.
Contact Garland Painting Pros today for your free estimate on fence painting or staining in Garland TX.
(972) 591-1434Fill out the form and we’ll get back to you the same day.
We do this work well beyond Garland. Pick your city for local detail, pricing, and FAQs.
Text or upload a few photos and our Garland TX painters send you a written quote the same day. No home visit needed.